Started working on the Tron cabinet today. I needed to disassemble it so I could paint it. Taking this thing apart will also make it much easier to clean thoroughly. This cabinet is probably the most complicated cabinet I’ve ever worked on.
I took a few pictures along the way:
Here is the art that shows the MCP through the shroud over the monitor.
This is the view from behind the cabinet through the shroud window where the MCP art usually sits.
Here is a shot of the lights near the control panel, with the panel removed.
Front view without the shroud.
Front view fully disassembled
Back view fully disassembled
Volume and test control bracket - severely bent up
After disassembling the cabinet, I focused my efforts on cleaning up the bottom inside area. This is where the AC power components (mounted on a piece of plywood) and the main game PCB boards are installed. I was able to really cut back on the amount of AC power components there were in the cabinet since many of them were used to feed the old power supply board that I replaced with a switching power supply converter kit. This really cleaned up the area well, and even gave me a nice place to mount the switching power supply. I took apart the whole assembly to sweep off 25 years of dust and grime, and to organize it a bit better. Here are some more pictures of the progress.
AC Power assembly board without components replaced by Switcher kit
Components replaced by Switcher kit - not longer needed!
AC power assembly board all cleaned up and put back into the cabinet.
Here’s the “guts” of the game all cleaned up and ready to go!
Another shot of the inside bottom of the cabinet.
Closeup of the Switcher Converter kit mounted on the cabinet wall where the old Power Supply used to be.
Loading ...
Related Articles
8 users responded in this post
I was kind of waiting for you explain to beginners how you keep all of the parts straight and organized when you completely gut a cabinet to repaint it. At this point in your collecting, you probably can remember and know how all the electronics work and go together easily and can re-assemble blindfolded, but someone who doesn’t know, should they label the parts, take specific photos?….
That’s a great question. I’ll have to take pics of what I did when I reassemble it. I basically took a ziplock bag for each “set” of parts, like the control panel brackets, marquee brackets, etc. to keep the screw and misc parts together. There are nice breakout drawings in the manual, but this is much easier. As for the AC power board I took apart to clean, I laid the screws out in the same arrangement I took them out from, so I could easily place them back in the same place. Oh, and take LOTS of digital pics for later reference. I did this for wire colors on speakers, etc.
Couple of interesting coincidences here. I just started my Tron restoration one day after you. Thanks so much for the detailed pictures. They’re actually very helpful in finding anything missing/different in mine. I did much of the same steps yesterday. Stripping the cab and getting ready to paint. Please keep the details coming!
And its okay for non-Jeff’s to post also.
I think there are more Jeff’s collecting than any other name…
I’ll keep them coming. I’m probably going to be doing the cabinet filling, sanding, and painting this week. Hopefully finishing it up by the weekend of the 4th.
Hello there. My Tron is up and running but I think the power supply is on its last leg. Where did you find that switcher conversion kit? Appreciate the help.
You can get the switcher kit from the parts page on http://www.arcadeshop.com. They have just about everything you’d need for arcade game restoration. You’re looking for the item called “MCR Power Supply Conversion Adapter”. You can also get a complete kit that includes a switching power supply if you don’t already have one.
Wow, so you were able to pretty much clear out all of the hardware on the floor of your TRON with that switcher kit? Along with the other benefits of doing so, I might do that just to appease the OCD part of my brain!
As others have said, thanks for the detailed restoration shots, they are helpful. Offhand, does your TRON have speaker grilles? Are they the generic rectangular midway style, or particular to the machine? Mine doesnt have any on it currently.
Chris, thanks for the response. I really like how I was able to remove so much from the power assembly. I really didn’t even know how much until I started putting it all back together. Eliminating the extra parts really made it easy to clean it up like I did. It was a really mess before. As far as speaker grills go, I didn’t have any either. The plastic monitor shroud served as the speaker grills. The “grills” were molded into the shroud at the top.
Leave A Reply
Please Note: Comment moderation maybe active so there is no need to resubmit your comments